Dymar Chemicals - Pipe Joint Lubricants

POTABLE WATER AND SEWER PIPE JOINT LUBRICANTS
FOR THE PIPE MANUFACTURER

Dymar provides a complete line of water soluble and Sub-aqueous lubricants for bell and spigot type PVC, polyethylene, concrete and ductile iron pipe. Using the right lubricant for the conditions will ensure the best possible pipe assembly and value.

Our products:

Provide optimum ‘slip’ or lubricity for your pipe material in your specific working conditions, ensuring safe and efficient assembly.
Are clean, odorless and easy to apply uniformly on wet or dry pipe, preventing needless over-use of the lubricant – lubricant won’t dry, drip off, or cause rolling of the gasket
Won’t deteriorate or swell rubber or plastic gaskets or cast iron pipe, and contain no petroleum.
Are completely biodegradable, will not support bacteria, and are non-toxic.
Can be private-label packaged in a wide variety of sizes.

DYMALUBE 10 WATER DISPERSIBLE TYPE PIPE JOINT LUBRICANT

NSF Standard #61 Certified for potable water on all pipe types

Consistency stable from -23ºC to 66ºC (works well in very cold to very hot weather)

Will leave no residue after assembly and flushing according to AWWA procedures

Our best performing, most versatile traditional NSF lubricant

DYMALUBE SA SUB-AQUEOUS TYPE PIPE JOINT LUBRICANT

"A unique NSF Certified sub-aqueous"

NSF STANDARD #61 Certified for all pipe types

Water insoluble – designed for wet or underwater pipe assembly

Consistency stable from -23ºC to 66ºC ( works well in very cold or very hot weather)

Our best performing sub-aqueous lubricant

RECOMMENDED AMOUNT OF LUBRICANT PER JOINT Pipe Size Lbs. for 100 Joints Pipe Size Lbs. for 100 Joints

Pipe Size Lbs. for 100 Joints		Pipe Size Lbs. for 100 Joints

12" 8 lbs.		84" 78 lbs.
24" 15 lbs.		96" 100 lbs.
36" 26 lbs.		108" 130 lbs.
48" 35 lbs.		120" 150 lbs.
60" 50 lbs.		132" 182 lbs.
72" 68 lbs.		144" 195 lbs.

12" - 0.10 lbs. per Joint	36" - 0.25 lbs. per Joint	78" - 0.74 lbs. per Joint
15" - 0.11 lbs. per Joint	42" - 0.38 lbs. per Joint	84" - 0.84 lbs. per Joint
18" - 0.13 lbs. per Joint	48" - 0.38 lbs. per Joint	90" - 0.92 lbs. per Joint
21" - 0.15 lbs. per Joint	54" - 0.46 lbs. per Joint	96" - 1.00 lbs. per Joint
24" - 0.17 lbs. per Joint	60" - 0.53 lbs. per Joint	102" - 1.22 lbs. per Joint
27" - 0.19 lbs. per Joint	66" - 0.60 lbs. per Joint	108" - 1.32 lbs. per Joint
30" - 0.21 lbs. per Joint	72" - 0.67 lbs. per Joint	114" - 1.42 lbs. per Joint

POTABLE WATER AND SEWER PIPE JOINT LUBRICANTS FOR THE PIPE MANUFACTURER

POTABLE WATER AND SEWER PIPE JOINT LUBRICANTS
FOR THE PIPE MANUFACTURER