Hydrocarbon Oils
Benefits of our HYDROCARBON VACUUM PUMP OILS
The Dymavac line of water-white vacuum pump oils uses a Severely Hydrotreated (S.H.T.) base stock, which yields a higher quality, purer oil compared to the solvent-refined base stock common to O.E.M.-supplied oils.
Your advantages will be:
- Improved viscosity stability
- Better temperature stability
- Improved oxidation resistance
- Lower carbon residue
- Better lubricating properties
- Higher boiling points
- Lower vapour pressures
- Lower priced
SEVERELY HYDROTREATED BASE STOCK VANE PUMP OILS
Dymavac 18A: | a severely hydrotreated base oil put through a further single molecular distillation process to enhance it’s vapour pressure properties. Ultimate Pressure @ 25 ° C – 3 x 10-![]() |
|
Direct replacement for: K.J. Lesker TKO 18, Kinney A, CVP 180 |
Dymavac 19: | a severely hydrotreated base oil put through a further single molecular distillation process. It exhibits very low sludge and varnish forming tendencies. Ultimate pressure @ 25 ° C – 1 x 10- ![]() Viscosity @ 38 ° C – 54 cSt |
|
Direct replacement for: Edwards Supergrade A/Ultragrade 19, Leybold HE175, CVP 19, Varian GP, Stokes V Lube ‘J’, Fisher 19, VWR 19, Inland 19, Alcatel AE 100, TKO 19 |
Dymavac 21: | is Dymavac 19 formulated with an additive package to resist decomposition and oxidation. | |
Direct replacement for: Inland 21 and General 21. |
Dymavac 19A: | a higher viscosity version of Dymavac 19. Ultimate Pressure @ 25 ° C – 2 x 10- ![]() Viscosity – 71 cSt at 38 ° C. |
|
Direct replacement for: Welch Duo Seal, TKO 19+, Kinney Super X |
Dymavac 20: | a severely hydrotreated base oil put through a further double molecular distillation process, and is specifically engineered for rotary vane pumps and Leybold blowers. It exhibits lower volatility, superior vapour pressure characteristics and longer service life when compared to other solvent refined oils. Ultimate pressure @ 25 ° C – 1 x 10- ![]() Viscosity @ 38 ° C – 58 cStApplications include corrosive environments such as CUD and Plasma Etchings systems where there is no risk from higher oxygen concentration. |
|
Direct replacement for: Edwards Ultragrade 20, Leybold HE200, KJ Lesker Diffoil 20, Alcatel AE200, Varian CS, VWR 20. |
Dymavac 22: | a severely hydrotreated base oil put through a further triple molecular distillation process. It is specifically engineered for use in high RPM, hot running vane pumps, and vane pumps in corrosive environments.Its’ superior performance characteristics make this the highest quality of all of our hydrocarbon oils.
Ultimate pressure @ 25 ° C – 1 x 10- |
|
Direct replacement for: Inland 45, Leybold HE275, Alcatel HE111, Permavis 8. |
Dymavac 55: | is a severely hydrotreated base oil put through a molecular distillation process to further enhance its vapour pressure propertiesUltimate pressure @ 25 ° C – 5 x 10-![]() Viscosity @ 38 ° C – 115 cStFor use in Kinney and Stokes pumps of 150 CFM or greater |
|
Direct replacement for: Kinney KV100, Leybold HE150 |
Dymavac 57: | is a severely hydrotreated piston pump oil put through a molecular distillation process to further enhance its vapour pressure properties.Ultimate pressure @ 25 ° C – 3 x 10-![]() Viscosity @ 38 ° C – 92 cSt |
|
Direct replacement for: Stokes V Lube “F” |
Dymavac Industrial: is a severely hydrotreated base oil that is not put through the same degree of molecular distillation that our other rotary vane pump oils are. Hence, it is the lowest cost hydrotreated vacuum oil, and was created to provide bulk purchasers with a higher quality, vacuum-specific, competitively priced alternative to their use of hydraulic and turbine oils in vacuum systems.
Dymavac Industrial is non-polar with virtually no aromatic molecular content, and exhibits very low sludge and varnish forming tendencies compared to solvent refined oils. The user will experience lower vapour pressure and reduced backstreaming in their system compared to one running on hydraulic/turbine oils.
Dymavac Industrial is custom-blended for the customer to meet their specific viscosity requirements.
Dymavac Vacuum Flushing Oil: is a severely hydrotreated base oil designed for a between oil change procedure to assist in removing particulate and contaminants remaining in all types of vane and piston pumps. This clear, colourless, odorless oil has a light viscosity nature of 3.6 cSt at 40 ° C, and an ultimate pressure of 1 x 10- torr at 25 ° C.
NON-HYDROTREATED HYDROCARBON MECHANICAL PUMP OILS
Dymavac 41,51 and 61: | are hydrocarbon oils which contain water demulsifiers to aid in the gas ballasting of water vapour, and are designed to prevent the accumulation of particulate, sludge, and varnish on the inner components of the pump. | |
Dymavac 41: | is designed for vane pumps and small piston pumps under 150 CFM. Ultimate pressure @ 25 ° C – 1.5 x 10- ![]() Viscosity @40 ° C – 74 cSt |
|
Dymavac 51: | is designed for rotary piston pumps. Ultimate pressure @ 25 ° C – 3 x 10- ![]() Viscosity @ 40 ° C – 95 cSt |
|
Direct replacement for: Stokes V Lube ‘F’, CVP 195 |
Dymavac 61: | is designed for hot running rotary piston pumps. Ultimate pressure @ 25 ° C – 3 x 10- torr Viscosity @ 40 ° C – 125 cSt |
|
Direct replacement for: |
Dymavac 67: | is a paraffinic hydrocarbon oil designed for Stokes 212 and 412 – 150 CFM or greater – piston pumps because of its excellent sealing and lubrication qualities. Applications: E-beam welding, heat treating, vacuum melting and metallizing.Ultimate pressure @ 25 ° C – 3 x 10-![]() Viscosity @ 40 ° C – 119 cSt |
|
Direct replacement for: Stokes V lube ‘G’, Edwards 16, Inland 87 |
Dymavac 77: | is a rotary piston pump hydrocarbon oilUltimate pressure @ 25 ° C – 1 x 10-![]() Viscosity @ 40 ° C – 90 cSt |
|
Direct replacement for: Stokes V Lube ‘F’, Inland 77, TKO 77, Mvak 77, General 77 |
Dymavac 97: | is a hydrocarbon vacuum blower oilUltimate pressure @ 25 ° C – 5 x 10-![]() Viscosity @ 40 ° C – 219 cSt |
|
Direct replacement for: Stokes V Lube ‘H’ |