Skip to Content
Stocking distributor & technical reseller|Mississauga, Ontario|Since 1990905-828-6022|Toll-free 1-866-396-2701|info@dymarchem.com

Compressor fluids

Compressor oils for air, food plants, refrigeration and process gas

Rotary screw, vane, piston and centrifugal compressors each want something different, and so does the gas being compressed. Pick your service below, or send us the compressor make and the oil in it now.

LubriplateKem-A-TrixCreochemKrytox™Halocarbon
10,000+ hpotential drain interval, Lubriplate SynXtreme AC
NSF H1compressor fluids for food and beverage air
R-717ammonia refrigeration compressor oils
O2 & Cl2inert fluids for oxygen and chlorine compressors

Which compressor oil for which job

Follow the compressor maker’s viscosity grade. Within that, the service decides the chemistry.

ProductBrandBaseWhy choose it
Rotary screw and vane air compressors
Syn Lube 22–100LubriplatePAO synthetic, zinc-freeLong-life fluid for screw and vane units; also lowers power draw in centrifugal compressors. Typical drains of 6,000 to 8,000 hours
SynXtreme AC seriesLubriplatePolyolester (POE)Highest oxidation and hydrolytic stability in the range, with drain intervals of 10,000 hours or more possible
Syncomp AN-46LubriplateAlkylated naphthalene syntheticOil-flooded rotary screw and rotary vane air compressors
Synac seriesLubriplateDiesterHot, high-stress service up to 8,000 hours. Keeps valves clean in reciprocating compressors; also for vacuum pumps and blowers
SyncoolLubriplatePolyglycol / esterHot-running screw and vane compressors where a readily biodegradable fluid is wanted (OECD, more than 70% biodegradation)
Pro-Last X / XEKem-A-Trix100% syntheticCanadian-made industrial compressor fluid; XE for screw compressors needing 6,000+ hours
Compressor oils and custom blendsCreochemMineral and syntheticStandard grades, custom viscosities and private label
Piston and centrifugal compressors
AC seriesLubriplatePetroleum, anti-wearSix ISO grades formulated to cut carbon and varnish in reciprocating compressors
Turbine Oil 32LubriplatePetroleum, zinc-freeMeets the requirements of most centrifugal air compressors
Food and beverage plants (NSF H1)
SFGO Ultra 22–100LubriplatePAO syntheticNSF H1 compressor fluid that can also serve hydraulics and gearboxes in the same plant
Syncool FGLubriplatePolyglycol esterNSF H1 fluid for hot-running screw compressors
Pro-Last FGX / FGEKem-A-TrixSyntheticNSF H1, Kosher and Halal; FGE for screw compressors needing 8,000+ hours
Refrigeration compressors
68-PLubriplateSemi-syntheticAmmonia (R-717), CFC and HCFC systems such as R-22, R-123 and R-502
68-NLubriplateNaphthenic mineralThe same refrigerants, in a highly refined naphthenic oil
RCO-68-FGLubriplatePAO synthetic, NSF H1Food-plant refrigeration with ammonia, CFC or HCFC refrigerants
Natural gas, CO2 and hydrocarbon gas
981LubriplateSynthetic, ISO 100Hyper-compressors, natural gas reinjection and reciprocating cylinders handling natural gas or CO2
989LubriplateSynthetic, ISO 150Flooded rotary screw and vane compressors on natural gas, CO2 or other hydrocarbon gases
Oxygen and chlorine
NRT 8805 oilKrytox™PFPENonflammable oil for oxygen and reactive-gas compressors; the NRT series has passed BAM oxygen testing
Halocarbon 27, 56, 95, 200HalocarbonPCTFEInert oils recommended by Halocarbon for chlorine pumps and compressors

Figures are typical; we send the current data sheet with your quote.

Questions

Mineral or synthetic compressor oil?

For rotary screw compressors, synthetics usually pay for themselves: they run cleaner, handle heat better and last several times longer between changes. A good mineral oil is fine for lighter-duty piston compressors.

Do I need a food-grade compressor oil?

If the compressed air can touch food, packaging or product, use an NSF H1 fluid. Many plants run H1 in every compressor so the two can never be mixed up.

Our refrigeration system uses R-134a. Do these oils work?

No. Lubriplate 68-P, 68-N and RCO-68-FG are made for ammonia, CFC and HCFC refrigerants and are not recommended with HFCs such as R-134a. Tell us the refrigerant and compressor and we’ll source the right oil.

Can I use a regular compressor oil for oxygen?

Never. Hydrocarbon oil in an oxygen compressor is a fire and explosion risk. Use a nonflammable fluorinated oil such as Krytox™ NRT 8805 or a Halocarbon PCTFE oil, and clean the compressor for oxygen service first.

Can I switch brands without flushing?

Sometimes. Some synthetics don’t mix well with mineral oil or with each other. Tell us what’s in the compressor now and we’ll tell you whether to flush; Lubriplate’s Syn Flush is made for the job.

Related

Talk to a specialist

Cross-references, food-grade approvals and hard-to-find specs. Let’s talk.

Tell us what you’re running today. If it’s not on this site, we can usually still get it.