What’s the job?
| Job | Grades | Why |
|---|---|---|
| Bolts and studs in heat or corrosion | 1000 Paste, P-37, Cu-7439 Plus | Consistent tightening torque and joints that come apart after years in service. P-37 is metal-free for stainless and nickel alloys |
| Press fits, splines, running-in | G-n Plus, G-Rapid Plus, D Paste | MoS2 pastes that prevent scoring when parts first meet |
| Valves, O-rings, sealing | 111 Compound | Silicone compound that lubricates and seals, −40 to 200 °C |
| Loaded plant bearings | BR-2 Plus, Longterm 2 Plus, BG-20 | General high-load greases; BG-20 is synthetic for heat and speed to 180 °C |
| Very hot or very cold bearings | 41, 33 Medium | 41 to 290 °C; 33 Medium down to −73 °C |
| Dusty, dry or vacuum conditions | D-321 R, 106 | Bonded dry films; D-321 R air-cures and works from −180 to 450 °C |
| Seized and rusted parts | Multigliss | Penetrating spray that loosens corroded joints |
| Food plants | G-4500 FM, G-0052 FM, P-1900 FM, L-1468 FM | Food-grade greases, anti-seize and freezer chain oil |
Figures from DuPont’s published Molykote® data. We send the current sheet with your quote.
Most ordered
Questions
Paste or grease: what’s the difference?
Pastes carry a high share of solids (MoS2, graphite, copper). The solids stay behind when the oil squeezes out or burns off, which is why pastes are used for assembly and bolting. Greases are made for bearings and moving parts.
Which anti-seize for stainless steel?
A metal-free paste such as P-37, with very low sulphur and halogen content. For general steel bolting, 1000 Paste is the usual choice.
Wasn’t Molykote a Dow Corning brand?
It was sold under the Dow Corning name for years and is now a DuPont brand. Grade names haven’t changed, so order by the name on your tube.