Gear oils
Follow the gearbox maker’s ISO grade. Within that, load, temperature and the gear type decide the chemistry.
| Product | Brand | Base | Why choose it |
|---|---|---|---|
| Enclosed industrial gearboxes | |||
| SPO series | Lubriplate | Petroleum, R&O and anti-wear | Worm, bevel, helical and spur gears, bearings and machine ways; safe with copper and silver alloys |
| Syn Lube HD series | Lubriplate | PAO, extreme pressure | Heavily loaded gears with lower friction and running temperature; HD 220 and 460 pass 12 FZG stages |
| PGO series | Lubriplate | Polyalkylene glycol (PAG) | Gearboxes, bearings and chains in severe service; exceeds 13 FZG stages, zinc-free |
| Kling Gear Oils | Lubriplate | Tacky red EP oil | Heavy-service gears; MIL-PRF-2105E, API GL-5 |
| Gear oils and custom blends | Creochem | Mineral and synthetic | Standard grades, custom viscosities and private label |
| Worm gears and cone drives | |||
| Synthetic Worm Gear Lubricant | Lubriplate | PAO, ISO 460 | All worm gear reducers; passes 12 FZG stages |
| CP Gear Oil 8-A | Lubriplate | Compounded (AGMA 8ACP) | Cone drives and double-enveloping worm gears |
| Open and girth gears | |||
| Syn Lube XHD 3200 | Lubriplate | PAO, ISO 3200 | Large girth gears such as rotary kilns; made to order |
| Gear Shield, No. 176 | Lubriplate | Open gear grease / semi-fluid | Exposed gears; No. 176 for central systems. See greases |
| Food and beverage plants (NSF H1) | |||
| PGO-FGL series | Lubriplate | PAG | Helical, bevel, planetary and worm gearboxes; protects against micropitting |
| KGL, TGGL / TGGL-P, Gear-Gel 003 | Kem-A-Trix | Food-grade | Food-grade gear oils made in Canada, plus a semi-fluid gel for fast reducers |
| Sensitive sites | |||
| Bio-Synxtreme EGO-150 | Lubriplate | Synthetic | Ultimately biodegradable (Pw1) gear oil for helical, bevel-helical and planetary reducers |
Truck, heavy-equipment and automotive gear oils (API GL-4 / GL-5) are on motor oils and transmission fluids.
Hydraulic oils
Match the pump maker’s viscosity and approvals first, then the conditions: cold starts, heat, fire risk, food contact or water nearby.
| Product | Brand | Base | Why choose it |
|---|---|---|---|
| Industrial anti-wear hydraulics | |||
| HO-32, HO-46, HO-68 | Lubriplate | Petroleum | Approved for Denison HF-0 and HF-2, accepted under Vickers M-2950-S; HO-46 approved to Cincinnati Milacron P-70 |
| ZF Industrial 32 to 150 | Lubriplate | Petroleum, zinc-free | Extended drain intervals in heavy-duty industrial hydraulics |
| Hydraulic oils and custom blends | Creochem | Mineral and synthetic | Standard grades, custom viscosities and private label |
| Synthetic and cold weather | |||
| Syn Lube 22–100 | Lubriplate | PAO, zinc-free | Long drain intervals, very low pour points, wide temperature range |
| MV-HO | Lubriplate | Multi-viscosity petroleum | Equipment that sees both summer heat and winter cold |
| Special Low Pour, Minus 70 | Lubriplate | Petroleum | Very cold starts and outdoor equipment |
| Fire resistant | |||
| Synxtreme FRHD-46, FRH1-46 | Lubriplate | Synthetic | Hydraulics near heat or ignition sources; FRH1-46 is NSF H1 |
| Food and beverage plants (NSF H1) | |||
| SFGO Ultra 22–100 | Lubriplate | PAO | NSF H1 fluid that can also serve compressors and gearboxes in the same plant |
| Near water and sensitive sites | |||
| Bio-Synxtreme HF series | Lubriplate | PAG, water-free | Fire resistant, non-sheening, meets the US EPA Vessel General Permit; not compatible with hydrocarbon fluids |
| Biobased Green 32, 46, 68 | Lubriplate | Vegetable oil | Ultimately biodegradable (ASTM D-5864, Pw1) with zinc-free anti-wear |
| Marine-Safe Hydraulic Oils | Lubriplate | Mineral, zinc-free | Non-toxic to aquatic life; meets Vickers, Racine and Denison HF-0 and HF-2 |
Figures are typical; we send the current data sheet with your quote.
Questions
Synthetic or petroleum gear oil?
Synthetics cost more but run cooler, last several times longer and handle temperature extremes. For hot, heavily loaded or hard-to-reach gearboxes they usually pay off. For lightly loaded gears with regular changes, a good petroleum oil is fine.
Can PAG gear oil be mixed with other oils?
No. PAG fluids don’t mix with mineral oil or PAO synthetics. Drain and flush before switching; we can advise on the procedure.
Which hydraulic oil for outdoor equipment in winter?
MV-HO for equipment that sees both summer heat and winter cold; Special Low Pour or Minus 70 for very cold starts. Tell us the lowest temperature and the pump type and we’ll confirm.
Can you match the oil we use now?
Yes. Send the brand and grade from the drum, the gearbox nameplate or the pump manual and we’ll match it and tell you what, if anything, changes.